One 64-bit dual-core Intel Itanium 2 processor; either 1.6-GHz/24 MB cache, or 1.6 GHz/18MB cache, or 1.4 GHz/12 MB cache; or 1.6 GHz/24 MB 9150N processor, or 1.6 GHz/18 MB9140N processor, or 1.4 GHz/12 MB 9120N processorOne I/O backplane.
Either PCI-X 2.0 backplane with 8 available slots or PCI-Express backplanewith 8 available slots2-GB PC2 4200 ECC×4 Single Rank Registered DDR2 SDRAMs (4×512MB DIMMs)24 DIMM slots (1×24 DIMM slot memory carrier board)One hot swap power supply
Maximum Server Capacities:
Four dual core 64 bit Intel Itanium 2 processors; either 1.6 GHz/24 MB cache, or 1.6 GHz/18MB cache, or 1.4 GHz/12 MB cache; or 1.6 GHz/24 MB 9150N processor, or 1.6 GHz/18 MB9140N processor, or 1.4 GHz/12 MB 9120N processorOne I/O backplane.
Either PCI-X 2.0 backplane with 8 available slots or PCI-Express backplanewith 8 available slots384 GB PC2 4200 ECC×4 Single Rank Registered DDR2 SDRAMs (24×8 GB DIMMs)48 DIMM slots (2×24 DIMM slot memory carrier boards)Sixteen Serial Attached SCSI (SAS) disk drivesTwo hot swap power supplies (two supplies enables redundancy)
Single-core 1.6-GHz with 12.0-MB Level 3 Cache 9110N processor
Band width
512 MB/s, shared with1000Base TX LAN CoreI/O
Bus Width
64 bits
Slot Keying
3.3 Volts
Maximum Cards
1, 2
Operating System
Windows, Linux
Minimum Resolution
1024x768
Refresh Rate
75 Hz
Standard System Features:
Four Operating System support: HP UX 11i version 2 (September 2006 Update required for dual core processors)
HP-UX 11iversion 3; Windows Server 2003 Enterprise Edition; Linux RHEL 4 U4 AS and ES, and SLES 10
OpenVMS (V8.3 minimumversion required)Core 8 port Serial Attached SCSI (SAS) host bus adapter, supports up to two internal RAID 1 volumes (2×2 HDDs) and a diskfor global hot spare, for a maximum of five disks in RAIDed arrays for HP UX, OpenVMS, and Linux.
The additional threedrives (of the maximum of eight drives supported) can be accessed normally, but not configured for RAID.
Factory set up ofRAID 1 is supported.
Please see rx2660 Ordering Guide for details.
HP/UX Mirroring is available for all HDDs in HP UXbased systems and HP Volume Shadowing Level 1 is available for HDDs in OpenVMS based systems.
Windows does notsupport the embedded 8 port SAS host bus adapter.
Windows based customers must select the 8 port Smart Array P400 SerialAttached SCSI (SAS) controller, supports internal RAID 1, 5 and 6 configurations.
The 8 port Smart Array P400 Serial AttachedSCSI (SAS) controller is supported by HP UX, OpenVMS, and Linux as an optional add on.
Core dual port 10/100/1000Base TX LAN (with auto speed sensing
RJ 45 connector, Wake On LAN support)Integrated iLO2 Management Processor for remote management and HA monitoringTelnet and web console via 10/100Base TX management LAN (RJ 45 connector)
Two RS 232 serial ports, one for console from the integrated iLO2 management processor and one from the processordependent hardware bus (PDH)Factory integration of processors, memory, disk drives, removable media, I/O cards, and HP Universal 10000 G2 seriesracks.
Rackmountable into 19 inch cabinets-HP Universal 10000 Series G2 racks as well as many third party racks, including fieldintegration into existing HP System E racksOptional stand alone pedestal mountThree year warranty with next business day on site